Subal YS-D2 Strobeset

Included: flash, strobe arm , Sea&Sea flash adapter and cable - ready for mounting on a Subal housing .

The YS-D2 is the new standard for underwater strobes.

in stock
  • ((incl. 20% UST)



  • 990,- €

  • Export price



  • 825,- €

Detail information:

YS-D2

Guide Number (ISO 100/m) (land): 32, 24 (with Diffuser 100 attached), 20 (with Diffuser 120 attached)
Beam Angle: 80°x80°  (without Diffuser), 100°x100°(Diffuser 100), 120° x 120° (Diffuser 120)
Batteries: 4xAA A: 6V Ni-MH: 4.8V
Number of Flashes *1: A: 150 Ni-MH: 200
Recycle time (full) *2: A: 3.0 sec. Ni-MH: 1.5 sec.
Color temperature: 5600K
Color temperature w/diffuser: 5250K
Depth rating: 100m  / 330ft
Dimensions (WxHxD) (Excluding protruding part(s) and the arm holder.): 89x133x116mm / 3.5 x 5.2 x 4.6 inches (incl. YS base but excluding protruding parts)
Weight : 623g / 22.0oz (w/o batteries) (inc. YS-mount and fixing bolt. Without batteries)
Underwater weight:  Approx.+40g / 1.4oz (incl. batteries)

Others:
Exposure control: DS-TTL II,  Slave TTL, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 /4 / 5.6 /8 / 11 / 16 / 22 / 32 (11 steps)
Pre-flash control: Equipped with pre-flash cancel mode
DS-TTL II function
Slave function
Auto power OFF function
Sync cord: 5-pin Sync cord/N, Fiber-Optic Cable
Over-pressure relief valve
LED target light (output is adjustable in 2 steps)
Audible charge signal

*1 Number of flashes and recycle time depends on the battery brand, temperature and frequency of use.
*2 Number of flashes and recycle time of Ni-MH batteries were tested on 2400 mAh batteries.